Building Material - Expansion Joint Covers List :

Armokaliptra me clips for wall

Clips affixed joint covers are offered in various clip sizes to suit particular joint gaps, from 10 mm to 150 mm. They are available from stock in 3m lengths in the following widths for flat sections: 50 mm to 210 mm, and in these widths for angle sections: 50 mm to 120 mm. Available in aluminium, brass and PVC.
 

Compression profiles

PSO Compression profile (to be glued or not) for easy and economical sealing of vertical and horizontal, indoor and outdoor joints. PSR Embedded flexible seals (they can be glued) for fast and cost¬effective installation in vertical and horizontal joints, either indoors or outdoors. PSR seals have a cap¬shaped top section that ensures a full covering of the joint, masking any possible irregularities in the joint.
 

JDH 5.02

Floor expansion joint for indoor and outdoor applications, comprising pre­drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints. Suitable for light traffic, and also for traffic of light trucks on pneumatic tyres and non­intense traffic of light vehicles.
 

JDH 5.04

Floor expansion joint for indoor and outdoor applications, comprising pre¬drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints. Suitable for medium heavy traffic, and also for traffic of fork¬lift trucks on pneumatic tyres and intense traffic of light vehicles.
 

JDH 5.10

Floor expansion joint for indoor and outdoor applications, comprising an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, marble, etc. For indoor and outdoor floor joints with a gap up to 30 mm. Suitable for pedestrians and non¬intense traffic of light vehicles.
 

JDH 5.24

Waterproof floor expansion joint, specially designed for car parks, with full stainless steel protection cover. High strength for intense vehicular traffic, high resistance to chemical products, hydrocarbons, etc. Hidden anchor system. Specially suitable for car parks, access ramps, esplanades and any other applications without traffic or with traffic of low speed vehicles, where a waterproof expansion joint is required. Interchangeable weldable insert. For indoor and outdoor floor joints with a gap up to 70 mm. Suitable for intense traffic of light vehicles. Particularly suitable for harsh environments (de¬icing grit, fuel, sea water).
 

JDH 5.26

Floor expansion joint, surface¬mounted, for indoor and outdoor applications, comprising aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc. Particularly suitable for flexible floors, with inserts of different heights
 

JDH 5.30

Waterproof floor expansion joint for car parks, access ramps, esplanades and any other applications without traffic or with traffic of low speed vehicles. It comprises a waterproof interchangeable flexible section able to take up expansion and contraction movements. The 910/PR joint is held by two galvanised steel or stainless steel strips available in different thicknesses.
 

JDH 6.02

All¬metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries… Suitable for indoor and outdoor applications. The upper cover plate can be supplied in various widths according to the expected expansion movement. Suitable for all types of applications: industrial floors, station, airports, shopping centres. For indoor and outdoor floor joints with a gap up to 70 mm. Suitable for heavy loads of up to 7.5 tonnes/axle and traffic of fork¬lift truck on solid tyres (Vulkollan), pallet trucks and vehicles on pneumatic tyres
 

JDH 6.04

JDH 6.06

Floor expansion joint for indoor and outdoor applications, comprising two side angle sections and a central element made of aluminium, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 20 mm. Suitable for heavy traffic of fork­lift truck on pneumatic tyres, lorries, pallet trucks and intense traffic of light vehicles.
 

JDH 6.08

All aluminium seismic floor expansion joint for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 100 mm. Suitable for heavy traffic of fork¬lift truck on pneumatic tyres, pallet trucks and intense traffic of light vehicles.
 

JDH 6.10

All¬aluminium seismic floor expansion joint for indoor and outdoor applications. The two aluminium upper components slide one into the other, which takes up any movement due to expansion and contraction. Interchangeable aluminium upper components (for heights H > 18.5 mm). Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap up to 100 mm. Suitable for heavy traffic of fork¬lift truck on pneumatic tyres, lorries, pallet trucks and intense traffic of light vehicles.
 

JDH 6.30

All¬brass floor expansion joint for indoor and outdoor applications, comprising two side angle sections held by fixing brackets and a central element made of brass, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, marble, etc. For indoor and outdoor floor joints with a gap up to 30 mm. Suitable for pedestrians and non¬intense traffic of light vehicles.
 

JDH 6.34

All aluminium floor expansion joint, surface¬mounted, for indoor and outdoor applications. The two aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap between 35 mm and 50 mm. Installation on finished floors. Suitable for heavy traffic of fork¬lift trucks on pneumatic tyres, pallet trucks and intense traffic of light vehicles.
 

JDH 6.36

All aluminium floor expansion joint, surface¬mounted, for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc. For indoor and outdoor floor joints with a gap of 50 mm, 70 mm or 100 mm. Installation on finished floors. Suitable for heavy traffic of fork¬lift trucks on pneumatic tyres, pallet trucks and intense traffic of light vehicles.
 

JDT 7.02

This roof expansion joint cover comprises a waterproof EPDM membrane, a support system anchored to the concrete element (parapet), and an aluminium top that is clipped to the support system.
 

JDT 7.04

A special waterproof expansion joint suitable for roofs and car parks. Very flexible, and suitable for use with hot asphalt, it is compatible with PVC, EPDM and other waterproof membranes.
 
 

JDV 4.04

Vertical expansion joint for faades, walls and ceilings, comprising two pre¬drilled galvanised steel sections and an interchange able flexible insert, able to take up large multidirectional movements. Specially suitable for use with surface rendering
 

JDV 4.02

All¬aluminium vertical expansion joint for faades, comprising pre¬drilled aluminium side sections and an interchangeable section in the centre, able to take up large multidirectional movements. A waterproof membrane is available to ensure protection against the elements. Specially suitable for quality finish requirements and for wide joints with large seismic movements.
 

JDV 4.06

Vertical expansion joint for faades, walls and ceilings, comprising aluminium side sections, which can be fitted with expanded cellular rubber to compensate for surface irregularities, and an interchangeable insert in the centre, able to take up large multidirectional movements. Specially suitable for wide joints with large seismic movements
 

JDV 4.10

All metal vertical seismic expansion joint for train stations, airports, shopping centre… This range is design with springs to allow seismic movements.
 

Vedafeu C Rope firestop system

VEDAFEU C rope firestop system consists of a core of fireproof and rotproof mineral fibres bound by an outer braiding of fibreglass thread. They are resistant to water and humidity, as well as to most aggressive chemicals and micro¬organisms. VEDAFEU C rope firestop system meets norms for horizontal and vertical joints: tested without sealant and with a movement of +20%, they come in diameters from 12 mm to 180 mm and are EI 240 (fire integrity and thermal insulation of 240 minutes without failure) rated for all joints with gaps from 10 mm to 200 mm. VEDAFEU M Mattress firestop system For initial joint widths from 100 to 420 mm, with or without joint cover. Officially rated EI 120 minutes without failure.
 
 

VEDAFEU FB Fillerboard firestop system

2¬IN¬1 PRODUCT, it materializes the expansion joint while pouring the concrete and is 4¬hour fire rated.
 

VEDAFEU M Mattress firestop system

For initial joint widths from 100 to 420 mm, with or without joint cover. Officially rated EI 120 minutes without failure.
 

VEDAFEU N Blanket firestop system

These fire stop joint covers are specially designed to ensure the fire integrity and gas¬tightness of expansion joints with large gaps and/or large movements. Tested with movements of +50%, all our VEDAFEU N fire blankets have an EI classification for fire integrity and gas¬tightness, in compliance with current European and French standards, including EN 13501¬2 and EN 1366¬4 norms. VEDAFEU N fire stop joint covers are available in several sizes to suit joint gaps from 100 mm to 840 mm. Can be used for horizontal and vertical joints requiring fire stop joint protection, e.g. floor, wall and ceiling joints, joints between prefabricated faade elements, and seismic joints. They are also suitable for fire partitions, conduit penetrations, services ducts, protection of neoprene supports, and for joints on plate edges.
 
en_USEnglish
elGreek en_USEnglish