Building Material - Admixtures for Conrete List :

MasterGlenium C347

New generation super plasticizer of polycarboxylic ether (PCE) polymers, for high range water reducing admixture with a very high workability retention. (CE approved, EN 934¬2: Table 3.1 & 3.2). The recommended dosage rate is 0,37 ~ 1,87 lit per 100 kg cement.
 

MasterGlenium 11

New generation high range water reducing admixture primarily developed for ready mix concrete where slump retention, high strength and durability are required. (CE approved, EN 934¬2: Table 3.1 & 3.2). The recommended dosage rate is 0,52 ~ 1,85 kg (0,5 ~ 1,8 lit) per 100 kg cement.
 

MasterGlenium 21

New generation high range water reducing admixture primarily developed for ready mix Concrete where slump retention, high strength and durability are required. Advised for winter weather applications. (CE approved, EN 934-2: Table 3.1 & 3.2). The recommended dosage rate is 0,5 ~ 1,2 lit per 100 kg cement.
 

MasterPozzolith 132

Plasticizer, retarder, water reducing agent to produce low slump loss flowing concrete and extending workability. approximately. The recommended dosage rate is 0.2 – 0.7 ltrs/ 100kg of cement. The optimum dosage is 0.4 litres/ 100kg of cement.
 

MasterPozzolith 390N

Concrete plasticizer for use on site. Plasticizer / retarder to produce fluid oncrete with extended flowability. Does not contain chlorides. (CE approve, EN 934¬2: Table 2). The recommended dosage rate is 0.2 – 0.8 ltrs per 100kg of cement.
 

MasterGlenium 10

New generation concrete plasticizer. (CE approved, EN 934¬2: Table 2). The recommended dosage rate is 0.495 – 1.98 ltrs per 100kg of cement.
 

MasterSet R 105XR

Retarding admixture to increase ultimate strength. When added to the concrete mix, the admixture is absorbed onto the cement particles thus favoring the dispersion of cement agglomerates. Consequently, the flow of cement particles is easier and a higher workability is therefore obtained. (CE approved, EN 934-2: Table 10). The recommended dosage rate is 0.2 – 0.8 ltrs per 100kg of cement. The optimum dosage is 0.4 litres/ 100kg of cement. Watertight admixtures
 

MasterLife WP 701 (Πρώην RHEOMAC 701)

A liquid Waterproofing admixture. for concrete to give high water resistance. It significantly reduces water cement ratio whilst maintaining workability without effecting compressive strength. It is effective as a permeability¬reducing admixture both under conditions of pressure and capillary absorption and also has water¬reducing properties. The use of Master Life WP 701 enables all these criteria to be met due to its strong plasticizing and water reducing properties.
 

MasterPel 790 (Πρώην RHEOMAC – RHEOFIT 790)

A highly penetrative low viscosity emulsion for surface application to concrete, masonry and blockwork surfaces, or for use as a high performance integral waterproofer for wet or dry cast concrete. On curing, it provides a waterproof surface/product with minimum effect on the original appearance and texture
 

MasterSet AC 42

It is a liquid accelerating water ¬reducing admixture based on sulfonate synthetic polymers. MasterSet AC 42 accelerates the reaction between water and cement especially at early ages. Cement hydration of cement occurs more rapidly, and positively influences the rate of strength development particularly in cold weather.
 

MasterAir 108

It is an air entraining admixture designed to increase durability of concrete structures against freeze/thaw cycles damages (exposure classes XF1¬4 according to EN 206¬1). MasterAir 108 provides durable concrete resistant to ice and frost by creating stable, small, closely spaced air bubbles system. In order to meet EN 206¬1 requirements (the optimum air content should be in the range of 4-6%), the recommended dosage rate of MasterAir 108 is 0.03¬0.400 litres per 100 kg of binder. Other dosages may be recommended in special cases according to specific job site conditions
 

MasterLife WP 1000

A specific integral crystalline waterproofing admix to be added to the concrete mix, to impart waterproofing properties due to active chemicals that react with the moisture in fresh concrete to generate a non¬soluble crystal line formation throughout the capillary pores of cement matrix. MasterLife WP 1000 consists of Portland cement, selected filler and fine sand and various active, proprietary chemicals that react with water and moisture higher that 95% closing and sealing capillary porosity and micro¬cracks lower that 0,4 mm
 

MasterFinish SRT 480

A range of positive surface retarders, water based, is available in 4 colors depending on the size of the aggregates to disable and depth of the desired attack. The active components of Masterfinish SRT 480 acting on the concrete surface, on a determined depth so as to retard curing. After cleaning with water, using a high pressure cleaner for professional use, the aggregates are apparent. The main areas of application are roads, pavements, pedestrian areas, sidewalks, patios, garage raids, private facilities, and traditional architectural concrete aggregate concrete.
 

MasterMatrix SDC 150

An aqueous solution of a high¬molecular weight innovative synthetic copolymer. Thanks to its tailored mode of action in concrete, Master¬Matrix SDC 150 imparts a level of viscosity within a mix enabling the right balance between fluidity, passing ability and resistance to segregation to be achieved. The balance is lacking when the fluidity of the concrete is obtained by adding water. MasterMatrix SDC 150 is batched on the total of fines below 0.125 mm and is recommended between 0.25¬ 1.5 % by weight of fines.
 

MEYCO® MS 685

Micro silica fume in dispersion. The dosage of MEYCO MS 685 is between 0.5 to 5% by weight of the mixture of cement. MasterLife SRA 100 (Formerly STABILMAC 100) Expansive agent for the production of shrinkage –compensating concrete. The dosage can range from 20 to 40 kg per m3 of concrete as a function of the prescription of the concrete mix. The advised dosage is from 20 to 30 kg per m3 of concrete..
 

MasterMatrix UW 444

MasterColor 100

Color line in powder form, based synthetic oxides for use in the production of colored concrete products. Dosage rate is from 0.5 to 6 kg per 100kg cement.
 

MasterRoc FLC 100

Shrinkage Compensating and Plasticizing Powder Admixture for Anchoring and Grouting Is designed specifically for rock bolts and rock anchors using both normal steel anchors and tube anchors. It is ideal for overhead applications because of its thixotropic nature, preventing the grout from running out of the drill hole. Due to its shrinkage compensating properties, it secures the bonding between anchor and rock, and ensures the steel of the anchor or rock bolt is not exposed to chemical attac
 

MasterLife SRA 100 (Πρώην STABILMAC 100)

MasterLife SRA 100 is an inorganic product in powder form to be used in addition to the other concrete compo- nents to produce shrinkage compensating concrete.
 

MasterGlenium ACE 14

New generation superplasticizer of polycarboxylic ether (PCE) polymers suited for precast industry (CE approved, EN 934-2: Table 3.1 & 3.2). A specifically designed formulation with active ingredient, Master Glenium ACE 14, offers excellent dispersion of cement at low water binder ratio and exceptional early strength development. The recommended dosage rate is 0,51 ~ 1,85 kg (0,5 ~ 1,8 lit) per 100 kg cement.
 

MasterGlenium SKY 645 (Πρώην GLENIUM® SKY 645)

It is an innovative second generation superplasticizer of polycarboxylic ether (PCE) polymers. MasterGlenium SKY 645 is specially engineered for readymix Rheoplastic concrete having fluid consistence and self¬compacting concrete, having a very high workability retention. The fresh concrete shows no segregation and at the same time has a low water cement ratio and, consequently, high early and long term strengths
 

MasterGlenium SKY 646 (Πρώην GLENIUM® SKY 646)

An innovative second generation superplasticizer of polycarboxylic ether (PCE) polymers. It is derived directly from the Total Performance Control concept.MasterGlenium SKY 646 is specially engineered for readymix Rheoplastic concrete having fluid consistence and self-compacting concrete, having a very high workability retention. The fresh concrete shows no segregation and at the same time has a low water cement ratio and, consequently, high early and long term strengths May be used also to produce Rheodinamic concrete, capable of self-compaction, even in the presence of dense reinforcement, without the aid of vibration.
 

MasterGlenium SKY 695

MasterGlenium SKY 695 is specially engineered for ready¬mix Rheoplastic concrete having fluid consistence and self compacting concrete, having a low W/C and a very high workability retention, especially under hot weather conditions. The fresh concrete shows no segregation and at the same time has a low water cement ratio and, consequently, high early and long term strengths
 
en_USEnglish
elGreek en_USEnglish