Select Product Category
Geosynthetics - Geogrids List :
is a composite product of a Secugrid® geogrid, with a needle¬punched Secutex® nonwoven geotextile firmly welded between the reinforcement bars, for soil stabilisation, separation and filtration applications. Combigrid® combines all the requirements of a variety of properties in one single product. For this reason, the main area of use for Combigrid® is on weak subsoils where, in addition to reinforcement, filter and separating properties are required. As a rule, this means subsoils with a CBR value of less than 3 %. Thus, the areas of application for Combigrid® are to be found in the reinforcement of base courses, foundations, access roads, pipeline trenches and throughout the road building sector. The range of products available incorporates different degrees of tensile strength and nonwoven components and covers a variety of applications. Combigrid® is thus an all¬purpose product for universal applications.
It is the protective membrane par excellence in all construction sites where the technical component is important in terms of drainage capacity and mechanical strength
Significantly reduces the quantity of aggregates needed to stabilize load¬bearing soil. The aggregates are contained in the walls of the cell in order to prevent them from moving laterally due to the weight applied to the system. The multi¬purpose use of guttacell leads to significant cost savings thanks its easy preparation, installation and maintenance
Grids for lawn from recycled polyethylene (HDPE). Are shock¬resistant and particularly suited for parking, roads, and trails. Using anchor, lawn grids, are also ideal for protecting embankments and river shores.
It is a three¬dimensional composite product, consisting of a drainage core and firmly attached filter nonwoven geotextiles for drainage applications. Secudrain® is used extensively to drain water or gas in various applications. In landfill engineering, Secudrain® serves three functions at once (filtration, protection and drainage) when installed directly above a geomembrane. The ability of Secudrain® to passively relieve water pressure makes it ideal for drainage over buried structures and for road¬edge strip-drain applications. The filter geotextiles and the drainage core can be efficiently dimensioned to meet the required drainage capacity. Secudrain® is also used success fully as a drainage layer in the construction of buildings, tunnels and roofs
It is a structurally sound and stable geogrid for soil reinforcement, manufactured of extruded and drawn bars, laid and welded solid together. Secugrid® geogrids provide tensile reinforcement for base courses in railway and highway foundation engineering, steep sided soil em bank ments and retaining walls, foundation reinforcement of earth embankments, load transfer of overlying soil masses, spanning voids and sink holes, sludge lagoon closures, trench covers and beds. With the available tensile strengths Secugrid® is suitable for the most demanding projects. In addition to our standard geogrid products, we also manufacture Combigrid® ¬ a high strength compo site product comprising a geogrid and nonwoven geotextile.
It is a three¬dimensional erosion control mat with a labyrinth¬like synthetic core. Secumat® erosion control mats are used for slope and ground protection in road building, landscaping, and landfill engineering works. Waterways engineering works employ Secumat® on flood plains and embankments. Properly dimensioned it prevents the sliding and washing out of the soil and cover layer while facilitating rapid vegetation growth. Upon heavy rains and water flows, the reinforcing ability of Secumat® prevents erosion of the otherwise vulnerable vegetation. Once vegetated, Secumat® reduces runoff velocities and thereby increases infiltration and reduces discharge. Directly next to water courses, Secumat® protects the banks from the scouring action of water flow.