Waterproofing - Asphalt Membranes List :

Waterproofing Material 4,0mm

It is polymer-modified waterproofing membrane obtained from the modification of distilled bitumen with poly-olefin based co-polymers. The modified compound ensures ease of application, reduced consumption of gas and has excellent adhesion properties that ensure, when the membrane is properly installed, very good bonding and tightness of all joints and overlaps. WATERPROOFING MATERIAL is a very versatile waterproofing membrane and is suitable for most waterproofing applications.
 

Waterproofing Material Mineral 4,5Kg

It is polymer-modified waterproofing membrane obtained from the modification of distilled bitumen with poly-olefin based co-polymers. The modified compound ensures ease of application, reduced consumption of gas and has excellent adhesion properties, even at low temperatures (-5°C). This type, because of the top layer with slates, has UV protection.The carrier is a polyester and glass composite with longitudinal reinforcement yarn, and slate grey white, green or red on the top, weight 4,50kg / m2, in roll sizes 1,00×10,00m.

Waterproofing Material Mineral 5,0Kg

It is polymer-modified waterproofing membrane obtained from the modification of distilled bitumen with poly-olefin based co-polymers. The modified compound ensures ease of application, reduced consumption of gas and has excellent adhesion properties, even at low temperatures (-5°C). This type, because of the top layer with slates, has UV protection.The carrier is a polyester and glass composite with longitudinal reinforcement yarn, and slate grey white, green or red on the top, weight 5.00kg / m2, in roll sizes 1,00×10,00m.

Waterproofing Material Mineral 5,5Kg

It is polymer-modified waterproofing membrane obtained from the modification of distilled bitumen with poly-olefin based co-polymers. The modified compound ensures ease of application, reduced consumption of gas and has excellent adhesion properties, even at low temperatures (-5°C). This type, because of the top layer with slates, has UV protection.The carrier is a polyester and glass composite with longitudinal reinforcement yarn, and slate grey white, green or red on the top, weight 5.50kg / m2, in roll sizes 1,00×10,00m.

Waterproofing Material P200

It is polymer-modified waterproofing membrane obtained from the modification of distilled bitumen with poly-olefin based co-polymers. The modified compound ensures ease of application, reduced consumption of gas and has excellent adhesion properties, even at low temperatures (-5°C). The carrier is an high-grade non-woven spunbond polyester which provides excellent mechanical characteristics,. Upper surface: Polyethylene fast burning film or sand and lower surface: Polyethylene fast burning film ,, 4mm thickness , in roll sizes 1,00×10,00m.

EXTRABIT

It is polymer-modified waterproofing membrane obtained from the modification of distilled bitumen with poly-olefin based co-polymers. The modified compound ensures ease of application, reduced consumption of gas and has excellent adhesion properties, even at low temperatures (-5°C). The carrier is a polyester and glass composite . Upper surface sand;,lower surface polyethylene fast burning film. 5mm thickness , in roll sizes 1,00×7,50m

Esha Duro

The plastomeric waterproofing membrane EshaDuro is produced from special types of bitumen and selected polymer materials based on propylene (APP). Its special composition gives the EshaDuro waterproofing membrane Resistance to ultraviolet radiation ageing high temperatures.

EshaDien

The elastomeric waterproofing membranes EshaDien are produced from special bitumen, modified with thermoplastic elastomeric materials ( SBS ). This SBS modification of the bitumen results in a binding material with enhanced elasticity and improved viscoelastic properties which are ideal for the production of superb quality bituminous waterproofing products.

EshaDien Geo

Elastomeric waterproofing membrane EshaDien Geo is produced from special bitumen, modified with thermoplastic elastomeric materials (SBS). The bitumen modification produces a binding material with enhanced elasticity, even at extremely low temperatures (-20 °C), and improved viscoelastic properties which are ideal for the production of superb quality bituminous waterproofing products. EshaDien Geo is reinforced with a spun-bonded polyester non-woven rot-resistant fabric and is covered from one side with PE film and from the other side with rot-resistant polyester geotextile of 190 gr/m2, giving maximum protection to the waterproofing layer for all vertical underground applications.

EshaDien Antiroot B2

ESHADIEN ANTIROOT (B2) is an elastomeric bituminous membrane with extremely effective antiroot properties. The antiroot properties of the membrane are accomplished with the dispersion, during production, within its modified bituminous mass, of the special antiroot additive PREVENTOL (B2). After its application ESHADIEN ANTIROOT (B2) consist a continuous barrier against plant roots, also along the overlapping. The antiroot additive PREVENTOL B2 remains active throughout the life span of the waterproofing system being remarkably stable even at relatively high or low temperatures

EshaGum Antiroot B2

ESHADIEN ANTIROOT (B2) is an elastomeric bituminous membrane with extremely effective antiroot properties. The antiroot properties of the membrane are accomplished with the dispersion, during production, within its modified bituminous mass, of the special antiroot additive PREVENTOL (B2). After its application ESHADIEN ANTIROOT (B2) consist a continuous barrier against plant roots, also along the overlapping. The antiroot additive PREVENTOL B2 remains active throughout the life span of the waterproofing system being remarkably stable even at relatively high or low temperatures

EshaGum

The plastomeric waterproofing membrane EshaGum is produced from special types of bitumen and selected polymer materials based on propylene (APP). This special composition gives the waterproofing membrane excellent resistance to ultraviolet radiation, ageing, high temperatures, flexibility at low temperatures ( -10 °C ) .

Esha Proof

The plastomeric waterproofing membrane EshaProof is produced from special types of bitumen and selected polymer materials based on propylen (APP). This special composition gives the waterproofing membrane excellent resistance to ultraviolet radiation, ageing, high temperatures, flexibility at low temperatures ( -7 °C ) .

Esha Protex

The waterproofing membrane EshaProtex is produced by processing special types of bitumen, which have been subjected to oxidization. The oxidized bitumen mixed with special additives and plasticizers is extremely effective in waterproofing applications, as it secures increased plasticity, softening point, heat resistance, decreased penetration

Timberpol Tex

A special breathable and waterproofing micro-membrane developed for under slating application and for wooden and ventilated roofs. The SBS polymer modified bituminous compound provides the membrane excellent elasticity and elongation. Both lower and upper surfaces have a non woven polyrpoylene fleece finish, which ensures the membrane breathability without compromising its waterproofing capacity

en_USEnglish
elGreek en_USEnglish