Select Product Category
Building Material - Repair and Strengthtening – Anchoring – FIBRENET List :
STRUTTURA FLUIDO-FL 179
Superfluid, single-component, shrinkage-compensated mortar, reinforced with synthetic fibres, with high mechanical strength and adhesion to the substrate. CE marked as structural repair mortar class R4 CC according to EN 1504-3 and as product for anchoring according to EN 1504-6. Suitable for precision anchoring and grouting and for restoring and reinforcing concrete and reinforced concrete elements. Pourable and pumpable in thickness from 10 mm to 50 mm.
STRUTTURA TIXO - X 259
Single-component, thixotropic, polymer modified, shrinkage-compensated cementitious mortar, fibre-reinforced with synthetic fibres, weather-resistant. CE marked as structural repair mortar class R4 PCC as per EN 1504-3. Suitable for cortical restoration of degraded concrete and reinforced concrete structures. Manual application with trowel or with suitable plastering machine in thickness from 10 mm to 50 mm.
STRUTTURA RASO FINO - RF 248
Single-component, thixotropic, polymer-modified, fibre-reinforced with synthetic fibres fine grain cementitious mortar. CE marked as structural repair mortar class R3 PCC as per EN 1504-3. For skim coat finishing, levelling and cortical restoration of concrete and reinforced concrete structures. Manual application with spatula and sprayed after mixing in thickness from 1 mm to 3 mm.
EPOCA CALCE-NHL 105
Pre-mixed, eco-friendly masonry mortar, fibre-reinforced with synthetic fibres, based on Natural Hydraulic Lime (NHL), highly workable, adhesive and breathable. CE marked as masonry mortar class M5 according to ΕΝ 998-2 and as rendering and plastering mortar class CS III according to EN 998-1. For levelling stone and brickwork substrates and consolidating, building and plastering masonry walls. Manual application or with suitable plastering machine at layer thickness from 10 to 30 mm.
MATERIA RINFORZA - RZ 220
Pre-mixed, eco-friendly mortar based on hydrated lime and hydraulic binders, with high workability, adherence and breathability. CE marked as masonry mortar class M20 according to ΕΝ 998-2 and as rendering and plastering mortar class CS IV according to EN 998-1. Suitable for consolidating, building, and plastering masonry walls, as well as for repairing plasters and forming fillets at wall-to-floor junctions. Manual application or with suitable plastering machine at thickness from 8 to 30 mm.
English 
Greek 
Russian